Hi, I am facing the issue with the Grove Vision AI camera module. I do not know if there is a possibility to combine the Trained model with Arduino code. Actually, I followed some tutorials on Seeed wiki which focuses on trained models and deploying that model to the device by coping the files of …

In fact, we are in talks to support Edge Impulse and are pleased that Edge Impulse will complete support for Vision AI as soon as possible, so when that happens, the output of the results from the models will be done through Arduino programming, so stay tuned.

Do you have some C++ interface to detect for example wild fires and send the result via some grove interface? is it possible?

Hi, as this product is currently designed, to recognise other models you may need to train them yourself or download them from some model websites (of course, we will go on to do this piece specifically in the future). Vision AI can then output the number of models identified to your model and its c…

I have followed that tutorial and deployed the model to detect wild fires to the Grove AI module. I have one question that weather the model installed once will remain active on next power-up? I have seen some wrong results. Thats is why asking.

The model firmware should be retained by the power off.

Page not found… Another broken link regarding the Grove AI Module

I’ve seen something similar. I flash the Face Detection model via USB and Senscraft page. Then unplug the USB and plug it into an Arduino (via I2C) and the model is gone.

Hi there, And Welcome here… You can see some here too, [image] Restoring Grove Vision AI V2 t Factory Settings - Prevents SenseCraft Pretrained model Upload Grove Hi there, and Welcome here… Where are you stuck at? Turns out there is no UF2 file for restor…

[image] Michael_Hoyt: I’ve seen something similar. I flash the Face Detection model via USB and Senscraft page. Then unplug the USB and plug it into an Arduino (via I2C) and the model is gone. That does sound like the model isn’t actually being committed to flash, or the board is booting into…

Hi there, Also worth Noting is the BSP you use on the Arduino side and the Schema LIB. check your versions and dates. That being said, it does work. Keep at it, You’ll get it working, You are close. :+1: GL :slight_smile: PJ :v:

Issue with Seeed Grove Vision AI module

Products & Technology Arduino & Seeeduino

PJ_Glasso September 1, 2026, 2:41am 9

Hi there,

And Welcome here…

You can see some here too,

HTH

GL PJ