Bricked my LinkStar H68K, please ,who knows how to unbrick it?

[Oscar]

hello dear people from the Seeed forums, i have a question: how do i unbrick my device?its a H68K from linkstar, i cant get the program to flash to see my device in any way…!! sooo, if any one experienced this too, please tell me how to undo this horror on h68k
kind regards , Oscar

[Citric]

Hi, have you read this tutorial?

Install Operating System - Seeed Wiki

If so, can you provide a screenshot showing the device status as displayed by RKDevTool?

[AvertEuphemism]

Try the OpenWRT TF card route. Boot into OpenWRT running on the TF card and then you should have access to the eMMC from there. You should be able to bypass the RockChipDevTools nonsense.

LinkStar-H68K-0232 Router Firmware Updates

The simple solution for flashing an image to eMMC without Windows and the customized Rockchip dev tools Follow directions to get OpenWRT on TF card Install Operating System - Seeed Wiki Place the TF card in and boot into OpenWRT Connect *nix machine to the LinkStar ETH2 port Run from local terminal dd if=<openwrt_image.img> | ssh [email protected] "dd of=/dev/mmcblk0" Power it off Take out the TF card Power on If you are using a machine without dd command like on Windows you can SCP the fil…

[Oscar]

Hello there all you good folks, thank you for your input, ive found a way out of the horror forest, ive managed to flash it after switching usb cable (c) and now its running openwrt once again, thank you very much community.