XIAO-LOG on XIAO esp32s3 in ESPHOME

[PJ_Glasso]

Hi there,
Might be the heat from the log device adds to it and just needs calibrated out? if possible.

@ahre

During testing of the XIAO-LOG, I noticed that the temperature and humidity readings are inaccurate while the battery is charging. When a battery is charging, there’s a jump of about +3°C and -5%. Are there any suggestions for how to prevent this?

I’m still having trouble calibrating the battery voltage measurement at GPIO9. Is there a recommended calibration method for the measuring hardware using 2 x 100K resistors and a MOSFET?

HTH
GL PJ