Respeaker 2-Miks Pi HAT

I live in South Africa. I bought two ReSpeaker 2-Mike Pi HAT cards yesterday, to use as the audio interface on Raspberry PI Zero W. I want to build a Google Assistant using this setup. I am using your procedure to install the driver, but it is not working. I am using Raspbian Stretch released in November 2018.

I have not installed any power to the ReSpeaker board, but I am wondering if this is causing the problem - should I connect power to the ReSpeaker board as well?.

Can I use the latest Buster image instead?



Hi Brian~

  1. We built a image with driver and avs installed. You can download

    image and burn to sd card. Then plug sd card to raspberry pi directly. You can use the arecord -l to detect the pi hat.

    <LINK_TEXT text=“ … 13&lang=en”></LINK_TEXT>

  2. We just tested it and it is compatible. thanks.

</s>pi@raspberrypi:~ $ arecord -l **** List of CAPTURE Hardware Devices **** card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 pi@raspberrypi:~ $ uname -a Linux raspberrypi 4.19.50-v7+ #896 SMP Thu Jun 20 16:11:44 BST 2019 armv7l GNU/Linux<e>

Thank you for your trouble.