Light / Deep Sleep Current Comparison of XIAO_MG24 and XIAO_nRF52840

[msfujino]

See also the link below.

DeepSleep bricks XIAO_MG24

After a careful search of BSP 2.2.0, I found a loop function already prepared to avoid bricking. There is no need to call any particular function, just set PC0 = LOW and reset to enter the loop and enable upload. Care should be taken when using PC0 as its own I/O. See below. \Arduino15\packages\SiliconLabs\hardware\silabs\2.2.0\libraries\ArduinoLowPower\src\ArduinoLowPower.cpp:L240 escape_hatch() \Arduino15\packages\SiliconLabs\hardware\silabs\2.2.0\variants\xiao_mg24\pins_arduino.h:L11…