help with DYP-ME007TX and Waspmote (arduino)

[maeishoj]

@schmron

Its so easy:

Communication format 9600,n,8,1

This module will occupy in the use of a microcontroller IO port, connect the power, the modules within the distance once every 50ms, and from the pin OUT one, with four 8-bit data frame format is: 0XFF + H_DATA + L_DATA + SUM

1. 0XFF: as a starting data for judgments.
2. H_DATA: from the high 8-bit data.
3. L_DATA: from the lower 8 bits of data.
4. SUM: data and, for efficacy. The 0XFF + H_DATA + L_DATA = SUM (lower 8-bit only)
   Note: H_DATA and L_DATA synthetic 16-bit data, ie the distance in millimeters values.

If you dont understand this, sell it on ebay and buy this one:
seeedstudio.com/depot/ultra- … th=144_149
There is an example for this module
seeedstudio.com/wiki/index.p … rogramming

What does “Communication format 9600,n,8,1” mean??
Have you ever heard of waspmote? It almost exactly like arduino… Could you help me reading from this sensor??

What are the steps?

I also bought the sensor from seedstudio, and I am waiting for it!