is this <LINK_TEXT text=“https://github.com/linux-downey/w600_de … d_document”>https://github.com/linux-downey/w600_development_board_document</LINK_TEXT>
w600 library etc compatible with the air602? Ive installed it , eventually ,in the arduino ide after much fiddling , and things compile ok but wont upload. various python errors moaning about codepage 1252 and invalid characters mapping. seems related to “!” character in the python source. fixed some but cant find the last 2.update: managed to lose the python errors. but cannot upload. now getting erorors like
Serial open success！com: COM4, baudrate: 115200.
Waiting for restarting device …
/
-
<br/>
|The target is waiting for the firmware file …
Serial into high speed mode
Start upgrade C:\Users\User\Documents\Arduino\Builds/sketch_wifi_client.ino.gz.img
Please wait for upgrade …
send error: expected ACK; got b’\x18’
send error: expected ACK; got b’\x18’
send error: expected ACK; got b’\x18’
send error: expected ACK; got b’\x18’
send error: expected ACK; got b’\x18’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
send error: expected ACK; got b’M’
EOT was not ACKd, aborting transfer
Upgrade C:\Users\User\Documents\Arduino\Builds/sketch_wifi_client.ino.gz.img image fail!
anyone any ideas? looks like serial problem to me , but no idea what settings should be. its all at 115200 8 none 1 no flow
