DRC reports strange errors ?

Seeed Services Fusion PCB/ PCBA Services
#1

Hello,

I downloaded project from here : h t t p s : / / github. c o m / r o b e l i x / n a n i n o
But when I run DRC,Eagle is reporting 78 errors stating that there are overlaps and dimensions problem.
There is no overlaps for sure because ,those wires are connected and they should be overlapped !
I believe those errors are not important but I dot know how to get rid of them :frowning:

Can I send those files for fabrication?Will manufacturer help me with these errors?

Eventually I would like to by pcbs from link mentioned above.

I am planing to by 10 pcs of these pcbs (10x10cm).
Images and whole project is in attachment.

Kind regards,
eagle_errors_dimensions.jpg
overlap_errors.jpg
gerber_files.zip (40.4 KB)

#2

Can I approve this errors and send gerber files to seeedstudio for fab?

Kind regards

#3

hi there，
1.the dimension error is the clearance between the board outline and the route is less than 6mil
please keep the clearance ≥6mil

2.the overlap error is there are more than two routes overlap
please confirm they are a same net class

if you have any more confusions, please upload your eagle files, i will check it again.

thanks
dingding

#4

This is exceptionally decent and good post…You shook posting it…Thanks a ton for posting it…!!!