Page 1 of 1

ReSpeaker 2-Mics Pi HAT

Posted: Sat Oct 13, 2018 2:14 am
by famvanklink
Installed the latest raspbian stretch on my rpi3b and ReSpeaker 2-Mics Pi HAT and google sdk like described on http://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/
I did had the configuration working 2 months ago.

Everything works exept my audio. My Google asssitant does understand commands, but does not speak after my fresh install of my rpi and the latest updates.


my config:

pi@Googleassistant:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Keyboard [Multimedia Air Mouse Keyboard], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0

pi@Googleassistant:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0

Re: ReSpeaker 2-Mics Pi HAT

Posted: Tue Oct 16, 2018 3:39 pm
by bill.yu
Hi there,

where do you plug the 3.5mm audio jack? It may be related with the audio output setting. please try both the 2 mics 3.5mm audio jack and raspberry pi 3.5mm audio jack. thanks.