Hi,
I recently purchased a Raspberry Pi 6 Speaker Hat. I was following the
instructions on :
<LINK_TEXT text=“http://wiki.seeedstudio.com/ReSpeaker_6 … ch-support”>http://wiki.seeedstudio.com/ReSpeaker_6-Mic_Circular_Array_kit_for_Raspberry_Pi/#tech-support</LINK_TEXT>
to
set it up.
I followed the steps to setup the seeed-voicecard git but the microphones
don’t show up when i do ‘arecord -L’.
My output looks like:
null
Discard all samples (playback) or generate zero samples (capture)
default
Playback/recording through the PulseAudio sound server
ac108
dmixer
ac101
There is nothing related to seeedstudio showing up. How can I get the mics
to be recognized?
FYI, the LEDs work with pixel_ring so I think that it is connected
correctly.
Hi,
Never mind fixed this issue but how do I access the button input? What GPIO
is it attached to?
Hi
Sanjif,
please see below schematic. thanks.
Thanks
best rgds
Bill
Thanks
best rgds
Bill