Respeaker 2-mics Pi hat Pi Zero W device issue

info about ReSpeaker series products

Moderators: lily.li, violet, seth.welday

Post Reply
spam.pouet
Pre-kindergarten
Pre-kindergarten
Posts: 1
Joined: Fri Mar 01, 2019 9:26 pm

Respeaker 2-mics Pi hat Pi Zero W device issue

Post by spam.pouet » Mon Mar 04, 2019 5:27 pm

Hello,
After followed this tutorial (due ta spam bla bla bla I can not link it...) I didn't go all devices :
pi@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []
Subdevices: 0/1
Subdevice #0: subdevice #0
pi@raspberrypi:~ $
Sometime I've got this :
pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0

I tried to re install and change raspbian mirror as it's said (due ta spam bla bla bla I can not link it...) but nothing change.
Any idea ?

I use snips and it's work but both detection and sound back are not great :/

Gorak

Post Reply