Hi all ! This is my first post !
I’ve purchased the ReSpeaker 2-Mics HAT for the Raspberry PI and would love to use it !
I’ve followed the instructions on the wiki - http://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/ - everything run ok, but after a reboot, no seed sound card is present, like it is displayed on the tutorial.
</s>pi@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0<e>
and no record device:
</s>pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
pi@raspberrypi:~ $ <e>
I’m using a Raspberry PI Zero W and the latest version of raspbian - STRETCH
Any hint what could it be ?