Sound Sensor - How is modification to 3.3V input possible?

Grove is a modulated, ready-to-use tool set.
Much like Lego, it takes a building block approach to assembling electronics.

Moderators: lily.li, violet, jeremy882, crail.lyu969

Post Reply
i_cop
Pre-kindergarten
Pre-kindergarten
Posts: 1
Joined: Wed Feb 08, 2012 1:00 am
Are you a staff member of seeedstudio?: no
Which products/projects are your favorite?: Water Sensor

Sound Sensor - How is modification to 3.3V input possible?

Post by i_cop » Wed Feb 08, 2012 1:09 am

Dear community,

I plan to use the Grove-Sound Sensor (http://www.seeedstudio.com/wiki/index.p ... und_Sensor) for a project that can only supply an input voltage of 3.3V. However, the component itself is rated for a minimum input voltage of 4V.

My questions are the following:
1. Is it possible to modify the circuit (http://www.seeedstudio.com/wiki/images/ ... or_sch.PNG to work with a supply voltage of 3.3V instead of 4V?

2. How is it possible (or impossible in case... )?

I really appreciate your detailed answer and would like to thank you all personally for the great help provided. Thank you.

Have a nice day,

i_cop

yuriq
Elementary-3
Elementary-3
Posts: 383
Joined: Wed Dec 07, 2011 5:33 pm

Re: Sound Sensor - How is modification to 3.3V input possibl

Post by yuriq » Wed Feb 08, 2012 2:46 pm

Dear customer,

1.As you see that schematic, resistance is beside VCC so if you supply low voltage to module that can reduce the sensitivity.We not suggest to do that.

2.You mean for project?
Just depend what you need to do.Everything could make voice so let you guys to thing about it. :)

Best regards,

Yuri

Post Reply