stalker not uploading

Arduino, Seeeduino Serials and mutants. Share your problems and experence on arduino compatible board such as seeeduino/stalker, etc.

Moderators: lily.li, violet, salmanfarisvp

Post Reply
oogs
Pre-kindergarten
Pre-kindergarten
Posts: 6
Joined: Fri Nov 12, 2010 6:50 am

stalker not uploading

Post by oogs » Sat Nov 20, 2010 10:31 pm

I uploaded the wrong program and paniced, then hit the stop button, it stopped the upload but now I can't upload to the stalker board any more, would burning a new bootloader cure this ? , the error I get is : avrdude; stk500_getsync(); not in sync; reap=0x00 and avrdude;stk500_disable(); protocol error expect=0x14, reap=0x51.

oogs
Pre-kindergarten
Pre-kindergarten
Posts: 6
Joined: Fri Nov 12, 2010 6:50 am

Re: stalker not uploading

Post by oogs » Sat Nov 20, 2010 10:59 pm

I found the problem myself the problem was because I selected the at168 instead of the
at328 in the board selection process.

Post Reply