Wio Terminal and https://wiki.seeedstudio.com/Grove-SPDT_Relay_30A/

The Wio Terminal puts out 3.3V on the Grove connectors.
Is there a way to make it put out 5V?

I would have thought you’d make everything voltage compatible in the Grove system.

Scott

Hi @mischko

The newer Groves are pretty much all 3.3/5V compatible and suitable for the SAMD series board. Some of the older Groves require 5V. In the current verison of Wio Terminal, there isnt a way to output 5V from Grove ports.