Wio LTE EU http post

tepalia02 · May 24, 2023, 9:00am

I think you have to perform this rask by using WioLTE, wire.h and arduinohttpclient.h

Seeed-Studio/WioLTE_Cat_NB1_Arduino_Library/blob/master/README.md

  [![Build Status](https://travis-ci.com/Seeed-Studio/WioLTE_Cat_NB1_Arduino_Library.svg?branch=master)](https://travis-ci.com/Seeed-Studio/WioLTE_Cat_NB1_Arduino_Library)
# Wio LTE Cat NB1

The Wio LTE Cat NB1 is combined with **STM32F405RGT6** and external **ublox MAX MQ8** GNSS chip and the **ublox SARA-R4 LTE Cat NB1** cellular module.

<img src=https://raw.githubusercontent.com/lanselambor/WioLTE_Cat_NB1_Arduino_Library/master/img/WioLTE_Cat_NB1_Front.jpg width=400><img src=https://raw.githubusercontent.com/lanselambor/WioLTE_Cat_NB1_Arduino_Library/master/img/WioLTE_Cat_NB1_Back.jpg width=450>



## Features

* Embedded power management unit (PMU) featuring ultra-low deep-sleep current consumption
* External GNSS chip can use GPS/BeiDou/GLONASS/Galileo/ 
* Transplantable and expansible AT Command Library for Wio Tracker
* Arduino IDE compatible
* 6 Grove Connectors
* Nano SIM and TF card 2 in 1 socket


## Specification

This file has been truncated. show original