The XIAO nRF54L15 Works with Arduino

[msfujino]

I have posted sample sketches for running the Wio-SX1262 for XIAO at the link below. Please take a look.

Using the “Wio-SX1262 for XIAO” to easily build LoRa point-to-point communication with various XIAOs

As shown in the POST #1, I’ve been running the Wio-SX1262 on various XIAO boards, but I was also able to easily run the Wio-SX1262 on the XIAO_nRF54L15 by installing “nRF54L15 Boards by nRF54L15 Clean Arduino” via the Arduino IDE’s Board Manager. The sample sketch for the nRF54L15 is available here. POST_SX1262_nRF54_P2P.zip (4.7 KB) Please refer to post #8 for sketches for other XIAO models.