Maix-Bit V2.0 programming problem

Products & Technology Hardware Products for AIoT Applications
#1

I have Maix-Bit V2.0 and cannot program it from Arduino using Maxduino(K210) Version 0.3.9 on Mac Mojave 10.14.5, arduino 1.8.8

I can program a Maix-Bit V1.09 successfully.

Version 2.0 error:

…

Sketch uses 322706 bytes (3%) of program storage space. Maximum is 8388608 bytes.

[INFO] ANSI colors not used

[INFO] COM Port Selected Manually: /dev/cu.usbserial-00001014B

[INFO] Default baudrate is 115200 , later it may be changed to the value you set.

[INFO] Trying to Enter the ISP Mode…

…

Greeting fail, check serial port ([ERROR] No vaild Kendryte K210 found in Auto Detect, Check Your Connection or Specify One by-p /dev/ttyUSB0 )

Greeting fail, check serial port ([ERROR] No vaild Kendryte K210 found in Auto Detect, Check Your Connection or Specify One by-p /dev/ttyUSB0 )



Please help. I just purchased 50 of these boards. Neither port /dev/cu.usbserial-00001014A or /dev/cu.usbserial-00001014B work.

#2

Hi there~,



Please check if the usb cable is 4 wires for data transfer. thanks.

#3

Yes. The same cable and software programed a Maix-Bit V1.09 successfully.

Perhaps the k-flash programmer software didn’t get updated correctly in Maxduino(K210) Version 0.3.9 to support the Maix-Bit V2.0?

#4

Hi there~



I am checking with the designer and will keep you posted here. thanks.

#5

Hi there~



You can select maixduino board to download for Maix bit v2.0 as temporary solution. we will add MAIX Bit V2.0 support this week. thanks.

#6

That works, thank you!

#7

Do you have an estimated delivery time for Maxduino(K210) Version to support the Maix-Bit V2.0?

#8

Hi there~



Please update maixduino to rev 0.3.10. It can solve the issue. thanks.