I2S Slave mode

Hi, if I have read the source of the respeaker 2-mic array hat right the WM8960 is configured as I2S master but I need it to be set as a slave.

I have a board with an TAS5756M as master.

How can i change the respeaker to act as slave?

Hi there,

respeaker 2-mic array hat sets as slave, <LINK_TEXT text=“https://github.com/respeaker/seeed-voic … ay.dts#L71”>https://github.com/respeaker/seeed-voicecard/blob/master/seeed-2mic-voicecard-overlay.dts#L71</LINK_TEXT>. so you can use it directly. thanks.