Hello,
About the problem:“avrdude: stk500_recv(): programmer is not responding”
If Freeduino V1.16(blue board)
Hardware:
R11,R12,CRS should be soldering well.
Software:
Select right Serial Port (Arduino IDE: tool–>Serial port–> select the right serial port);
Select right board (Arduino IDE: tool–>board–>Arduino diecimila or Duemillavone w/Atmega168).
If Freeduino V1.22(yellow board)
Hardware:
R11,R12,CRS should be soldering well.
Software:
Select right Serial Port (Arduino IDE: tool–>Serial port–> select the right serial port);
Select right board (Arduino IDE: tool–>board–>Arduino Duemillavone w/Atmega328).
Problem?Please contact us.
Albert