An error occurred when uploading sketch to seeeduino lorawan board via arduino ide

Arduino, Seeeduino Serials and mutants. Share your problems and experence on arduino compatible board such as seeeduino/stalker, etc.

Moderators: lily.li, violet, salmanfarisvp

Post Reply
keantattong
Pre-kindergarten
Pre-kindergarten
Posts: 9
Joined: Thu Oct 11, 2018 2:46 pm

An error occurred when uploading sketch to seeeduino lorawan board via arduino ide

Post by keantattong » Mon Jan 21, 2019 5:48 pm

Hi.

Currently, I encountered the issue regarding uploading sketches to seeeduino lorawan via arduino ide. The error message i get :
'Arduino: 1.8.7 (Windows 10), Board: "Seeeduino LoRaWAN"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\KtOng\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\KtOng\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\KtOng\Documents\Arduino\libraries -fqbn=Seeeduino:samd:rolawan -vid-pid=0X2886_0X800C -ide-version=10807 -build-path C:\Users\KtOng\AppData\Local\Temp\arduino_build_716992 -warnings=none -build-cache C:\Users\KtOng\AppData\Local\Temp\arduino_cache_640229 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.openocd.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\openocd\0.9.0-arduino -prefs=runtime.tools.openocd-0.9.0-arduino.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\openocd\0.9.0-arduino -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.CMSIS.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\CMSIS\4.0.0-atmel -prefs=runtime.tools.CMSIS-4.0.0-atmel.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\CMSIS\4.0.0-atmel -prefs=runtime.tools.bossac.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.bossac-1.6.1-arduino.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino -verbose C:\Program Files (x86)\Arduino\examples\01.Basics\Blink\Blink.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\KtOng\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\KtOng\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\KtOng\Documents\Arduino\libraries -fqbn=Seeeduino:samd:rolawan -vid-pid=0X2886_0X800C -ide-version=10807 -build-path C:\Users\KtOng\AppData\Local\Temp\arduino_build_716992 -warnings=none -build-cache C:\Users\KtOng\AppData\Local\Temp\arduino_cache_640229 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.openocd.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\openocd\0.9.0-arduino -prefs=runtime.tools.openocd-0.9.0-arduino.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\openocd\0.9.0-arduino -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.CMSIS.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\CMSIS\4.0.0-atmel -prefs=runtime.tools.CMSIS-4.0.0-atmel.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\CMSIS\4.0.0-atmel -prefs=runtime.tools.bossac.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.bossac-1.6.1-arduino.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino -verbose C:\Program Files (x86)\Arduino\examples\01.Basics\Blink\Blink.ino
Using board 'rolawan' from platform in folder: C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\hardware\samd\1.3.0
Using core 'arduino' from platform in folder: C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\hardware\samd\1.3.0
WARNING: Category '' in library FlashStorage is not valid. Setting to 'Uncategorized'
Detecting libraries used...
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10807 -DARDUINO_SAMD_ZERO -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -DUSB_VID=0x2886 -DUSB_PID=0x800C -DUSBCON "-DUSB_MANUFACTURER=\"Seeed Studio\"" "-DUSB_PRODUCT=\"Seeeduino LoRaWAN\"" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/CMSIS/Include/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/Device/ATMEL/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\cores\\arduino" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\variants\\arduino_zero" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp" -o nul
Generating function prototypes...
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10807 -DARDUINO_SAMD_ZERO -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -DUSB_VID=0x2886 -DUSB_PID=0x800C -DUSBCON "-DUSB_MANUFACTURER=\"Seeed Studio\"" "-DUSB_PRODUCT=\"Seeeduino LoRaWAN\"" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/CMSIS/Include/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/Device/ATMEL/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\cores\\arduino" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\variants\\arduino_zero" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp" -o "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\preproc\\ctags_target_for_gcc_minus_e.cpp"
"C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -DF_CPU=48000000L -DARDUINO=10807 -DARDUINO_SAMD_ZERO -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -DUSB_VID=0x2886 -DUSB_PID=0x800C -DUSBCON "-DUSB_MANUFACTURER=\"Seeed Studio\"" "-DUSB_PRODUCT=\"Seeeduino LoRaWAN\"" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/CMSIS/Include/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/Device/ATMEL/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\cores\\arduino" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\variants\\arduino_zero" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp" -o "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp.o"
Compiling libraries...
Compiling core...
Using previously compiled file: C:\Users\KtOng\AppData\Local\Temp\arduino_build_716992\core\variant.cpp.o
Using precompiled core: C:\Users\KtOng\AppData\Local\Temp\arduino_cache_640229\core\core_Seeeduino_samd_rolawan_0c9487c13c974766c7d68f6c4786c01f.a
Linking everything together...
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" "-LC:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992" -Os -Wl,--gc-sections -save-temps "-TC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\variants\\arduino_zero/linker_scripts/gcc/flash_with_bootloader.ld" "-Wl,-Map,C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.map" --specs=nano.specs --specs=nosys.specs -mcpu=cortex-m0plus -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -o "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.elf" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp.o" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\core\\variant.cpp.o" -Wl,--start-group -lm "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/..\\arduino_cache_640229\\core\\core_Seeeduino_samd_rolawan_0c9487c13c974766c7d68f6c4786c01f.a" -Wl,--end-group
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-objcopy" -O binary "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.elf" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.bin"
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-size" -A "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.elf"
Sketch uses 8460 bytes (3%) of program storage space. Maximum is 262144 bytes.
Forcing reset using 1200bps open/close on port COM4
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
Uploading using selected port: COM4
C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino/bossac.exe -i -d --port=COM4 -U true -i -e -w -v C:\Users\KtOng\AppData\Local\Temp\arduino_build_716992/Blink.ino.bin -R
No device found on COM4
An error occurred while uploading the sketch'

Before I encountered this issue, the process of uploading is smooth with some simple examples from this tutorial (http://wiki.seeedstudio.com/Seeeduino_LoRAWAN/). I try to upload again this sketch:
'void setup()
{
Serial1.begin(9600);
SerialUSB.begin(115200);
}

void loop()
{
while(Serial1.available())
{
SerialUSB.write(Serial1.read());
}
while(SerialUSB.available())
{
Serial1.write(SerialUSB.read());
}
}'
that saved in a new sketch (as previously saved same sketch in another sketch). When i try to upload the new sketch, the process take longer time compared to previous uploads and the above error message shown in the console. I tried to reinstall- install arduino ide, plugged-unplugged the usb connect to seeduino lorawan board even restart my laptop (OS: Window 10, 64bits) .

Hope can have some idea to solve the problem.
Top
bill.yu
Junior-6
Junior-6
Posts: 691
Joined: Mon Apr 02, 2018 11:05 am

Re: An error occurred when uploading sketch to seeeduino lorawan board via arduino ide

Post by bill.yu » Thu Jan 24, 2019 2:33 pm

Hi there,

Please double press the reset button and see if it solves the issue, thanks.
Top
keantattong
Pre-kindergarten
Pre-kindergarten
Posts: 9
Joined: Thu Oct 11, 2018 2:46 pm

Re: An error occurred when uploading sketch to seeeduino lorawan board via arduino ide

Post by keantattong » Fri Feb 08, 2019 5:25 pm

Thanks for your reply, it actually work when I press the reset button to reset the board. :):):)
Top
User avatar
designnotes.com
Pre-kindergarten
Pre-kindergarten
Posts: 10
Joined: Mon Jan 28, 2019 11:08 pm
Location: Philadelphia, PA
Contact:
Contact designnotes.com

Re: An error occurred when uploading sketch to seeeduino lorawan board via arduino ide

Post by designnotes.com » Sat Feb 09, 2019 10:25 pm

keantattong wrote: ↑
Mon Jan 21, 2019 5:48 pm
 Hi.

Currently, I encountered the issue regarding uploading sketches to seeeduino lorawan via arduino ide. The error message i get :
'Arduino: 1.8.7 (Windows 10), Board: "Seeeduino LoRaWAN"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\KtOng\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\KtOng\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\KtOng\Documents\Arduino\libraries -fqbn=Seeeduino:samd:rolawan -vid-pid=0X2886_0X800C -ide-version=10807 -build-path C:\Users\KtOng\AppData\Local\Temp\arduino_build_716992 -warnings=none -build-cache C:\Users\KtOng\AppData\Local\Temp\arduino_cache_640229 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.openocd.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\openocd\0.9.0-arduino -prefs=runtime.tools.openocd-0.9.0-arduino.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\openocd\0.9.0-arduino -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.CMSIS.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\CMSIS\4.0.0-atmel -prefs=runtime.tools.CMSIS-4.0.0-atmel.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\CMSIS\4.0.0-atmel -prefs=runtime.tools.bossac.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.bossac-1.6.1-arduino.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino -verbose C:\Program Files (x86)\Arduino\examples\01.Basics\Blink\Blink.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\KtOng\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\KtOng\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\KtOng\Documents\Arduino\libraries -fqbn=Seeeduino:samd:rolawan -vid-pid=0X2886_0X800C -ide-version=10807 -build-path C:\Users\KtOng\AppData\Local\Temp\arduino_build_716992 -warnings=none -build-cache C:\Users\KtOng\AppData\Local\Temp\arduino_cache_640229 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.openocd.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\openocd\0.9.0-arduino -prefs=runtime.tools.openocd-0.9.0-arduino.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\openocd\0.9.0-arduino -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.CMSIS.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\CMSIS\4.0.0-atmel -prefs=runtime.tools.CMSIS-4.0.0-atmel.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\CMSIS\4.0.0-atmel -prefs=runtime.tools.bossac.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.bossac-1.6.1-arduino.path=C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino -verbose C:\Program Files (x86)\Arduino\examples\01.Basics\Blink\Blink.ino
Using board 'rolawan' from platform in folder: C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\hardware\samd\1.3.0
Using core 'arduino' from platform in folder: C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\hardware\samd\1.3.0
WARNING: Category '' in library FlashStorage is not valid. Setting to 'Uncategorized'
Detecting libraries used...
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10807 -DARDUINO_SAMD_ZERO -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -DUSB_VID=0x2886 -DUSB_PID=0x800C -DUSBCON "-DUSB_MANUFACTURER=\"Seeed Studio\"" "-DUSB_PRODUCT=\"Seeeduino LoRaWAN\"" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/CMSIS/Include/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/Device/ATMEL/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\cores\\arduino" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\variants\\arduino_zero" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp" -o nul
Generating function prototypes...
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10807 -DARDUINO_SAMD_ZERO -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -DUSB_VID=0x2886 -DUSB_PID=0x800C -DUSBCON "-DUSB_MANUFACTURER=\"Seeed Studio\"" "-DUSB_PRODUCT=\"Seeeduino LoRaWAN\"" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/CMSIS/Include/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/Device/ATMEL/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\cores\\arduino" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\variants\\arduino_zero" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp" -o "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\preproc\\ctags_target_for_gcc_minus_e.cpp"
"C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -DF_CPU=48000000L -DARDUINO=10807 -DARDUINO_SAMD_ZERO -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -DUSB_VID=0x2886 -DUSB_PID=0x800C -DUSBCON "-DUSB_MANUFACTURER=\"Seeed Studio\"" "-DUSB_PRODUCT=\"Seeeduino LoRaWAN\"" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/CMSIS/Include/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\CMSIS\\4.0.0-atmel/Device/ATMEL/" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\cores\\arduino" "-IC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\variants\\arduino_zero" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp" -o "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp.o"
Compiling libraries...
Compiling core...
Using previously compiled file: C:\Users\KtOng\AppData\Local\Temp\arduino_build_716992\core\variant.cpp.o
Using precompiled core: C:\Users\KtOng\AppData\Local\Temp\arduino_cache_640229\core\core_Seeeduino_samd_rolawan_0c9487c13c974766c7d68f6c4786c01f.a
Linking everything together...
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" "-LC:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992" -Os -Wl,--gc-sections -save-temps "-TC:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\hardware\\samd\\1.3.0\\variants\\arduino_zero/linker_scripts/gcc/flash_with_bootloader.ld" "-Wl,-Map,C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.map" --specs=nano.specs --specs=nosys.specs -mcpu=cortex-m0plus -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -o "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.elf" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\sketch\\Blink.ino.cpp.o" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992\\core\\variant.cpp.o" -Wl,--start-group -lm "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/..\\arduino_cache_640229\\core\\core_Seeeduino_samd_rolawan_0c9487c13c974766c7d68f6c4786c01f.a" -Wl,--end-group
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-objcopy" -O binary "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.elf" "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.bin"
"C:\\Users\\KtOng\\AppData\\Local\\Arduino15\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-size" -A "C:\\Users\\KtOng\\AppData\\Local\\Temp\\arduino_build_716992/Blink.ino.elf"
Sketch uses 8460 bytes (3%) of program storage space. Maximum is 262144 bytes.
Forcing reset using 1200bps open/close on port COM4
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
PORTS {COM3, COM4, } / {COM3, COM4, } => {}
Uploading using selected port: COM4
C:\Users\KtOng\AppData\Local\Arduino15\packages\Seeeduino\tools\bossac\1.6.1-arduino/bossac.exe -i -d --port=COM4 -U true -i -e -w -v C:\Users\KtOng\AppData\Local\Temp\arduino_build_716992/Blink.ino.bin -R
No device found on COM4
An error occurred while uploading the sketch'

Before I encountered this issue, the process of uploading is smooth with some simple examples from this tutorial (http://wiki.seeedstudio.com/Seeeduino_LoRAWAN/). I try to upload again this sketch:
'void setup()
{
Serial1.begin(9600);
SerialUSB.begin(115200);
}

void loop()
{
while(Serial1.available())
{
SerialUSB.write(Serial1.read());
}
while(SerialUSB.available())
{
Serial1.write(SerialUSB.read());
}
}'
that saved in a new sketch (as previously saved same sketch in another sketch). When i try to upload the new sketch, the process take longer time compared to previous uploads and the above error message shown in the console. I tried to reinstall- install arduino ide, plugged-unplugged the usb connect to seeduino lorawan board even restart my laptop (OS: Window 10, 64bits) .

Hope can have some idea to solve the problem.
Hi,

This error is a very basic arduino error. Whenever this error occurs you just need to disconnect your usb cable and connect it again. it will solve the issue. Giving you tested solution.
Top
Post Reply

Return to “Arduino & Seeeduino”