Simple demo(via command)

[Jacket_Chen]

@vartak.anand

this is what i did
and it works for me.
can u show me how to do this using http

#include <Wifly.h>

#include <SoftwareSerial.h>

WiflyClass Wifly(2,3);

int LedPin = 5;

void setup()

{
pinMode(LedPin, OUTPUT);
Serial.begin(9600);

Wifly.init();

Wifly.setConfig(“ac_wi”,“password”); //the Ethernet information

Wifly.join(“ac_wi”);

Wifly.checkAssociated();

while(!Wifly.connect(“192.168.43.218”,“8080”)); //remote server address and port number

Wifly.writeToSocket(“Connected!”);

}

void loop()

{
//if(Wifly.canReadFromSocket()) //check if any message sent from the server
//{
//Wifly.readFromSocket(); //print message sent from the server on SSCOM
if(Wifly.readFromSocket()== ‘1’) //set a key word to collect sensor value
{
digitalWrite(LedPin, HIGH);
//Wifly.print(digitalRead(tiltswitch)+48); //get the sensor value printed by “+48″,
//changeing int into char format
}
else if(Wifly.readFromSocket()== ‘2’)
{
digitalWrite(LedPin, LOW);
}
//}

if(Serial.available())

{

Wifly.print((char)Serial.read()); // print message sent from SSCOM

//on the screen of the server

}

}

Hi,your code have some bugs.such as: “1” or “12” or “123” both can turn led on,etc.

And you can control LED via TCP,it is the same to http.