SenseCAP M2 LoRaWAN Gateway - How to ssh into console

Products & Technology SenseCAP
24

I saw this one?

Maybe test it first…

client
dev tun
proto tcp-client
remote YOUR_SERVER_IP 44875
nobind
persist-key
persist-tun
remote-cert-tls server
cipher AES-256-CBC
verb 3

# Authentication
auth-user-pass /etc/openvpn/credentials.txt

# Certificates
ca /etc/openvpn/ca.crt
cert /etc/openvpn/client.crt
key /etc/openvpn/client.key

GL :slight_smile: PJ :v:

Place these files in the OpenVPN config directory, typically /etc/openvpn/ or the M2 GUI-synced path:

  • client.conf ← (the config file above)
  • ca.crt ← Your CA certificate
  • client.crt ← Your personal/client certificate
  • client.key ← Your private key
  • credentials.txt ← Your username + password (2 lines):
yourusername
yourpassword

:warning: You must not use <ca>, <cert>, <key> inline blocks in embedded Linux configs unless explicitly supported — they often break OpenVPN startup on resource-limited UIs like SensCap’s.

If you can SSH or use serial:

openvpn --config /etc/openvpn/client.conf

This will output real-time logs and show any certificate or auth errors directly.