part Two:
[0001.005] I> Task: CPU WP0 (0x5000bb15)
[0001.010] I> Loading MCE
[0001.013] I> Slot: 0
[0001.015] I> Binary[8] block-0 (partition size: 0x80000)
[0001.021] I> get_binary_info: Binary name: MCE
[0001.026] I> Size of crypto header is 8192
[0001.031] I> BCH load address is : 0x4003e000
[0001.036] I> Size of crypto header is 8192
[0001.041] I> BCH of MCE read from storage
[0001.045] I> BCH address is : 0x4003e000
[0001.050] I> MCE header integrity check is success
[0001.055] I> Binary magic in BCH component 0 is MTSM
[0001.061] I> component binary type is 8
[0001.065] I> Size of crypto header is 8192
[0001.071] I> MCE binary is read from storage
[0001.077] I> MCE binary integrity check is success
[0001.082] I> Binary MCE loaded successfully at 0x40000000 (0x2c880)
[0001.089] I> Size of crypto header is 8192
[0001.104] I> Size of crypto header is 8192
[0001.108] I> Sending WP0 mailbox command to PSC
[0001.119] I> Task: XUSB Powergate (0x50000b91)
[0001.124] I> Skipping powergate XUSB.
[0001.128] I> Task: MB1 fixed firewalls (0x5002006d)
[0001.139] W> Firewall readback mismatch
[0001.143] W> Firewall readback mismatch
[0001.152] W> Firewall readback mismatch
[0001.162] I> Task: Load bpmp-fw (0x500203c9)
[0001.167] I> Slot: 0
[0001.170] I> Binary[15] block-0 (partition size: 0x180000)
[0001.176] I> get_binary_info: Binary name: BPMP_FW
[0001.181] I> Size of crypto header is 8192
[0001.186] I> BCH load address is : 0x807fe000
[0001.191] I> Size of crypto header is 8192
[0001.196] I> BCH of BPMP_FW read from storage
[0001.200] I> BCH address is : 0x807fe000
[0001.206] I> BPMP_FW header integrity check is success
[0001.211] I> Binary magic in BCH component 0 is BPMF
[0001.216] I> component binary type is 15
[0001.221] I> Size of crypto header is 8192
[0001.236] I> BPMP_FW binary is read from storage
[0001.243] I> BPMP_FW binary integrity check is success
[0001.249] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfddc0)
[0001.257] I> Slot: 0
[0001.259] I> Binary[16] block-10000 (partition size: 0x400000)
[0001.266] I> get_binary_info: Binary name: BPMP_FW_DTB
[0001.271] I> Size of crypto header is 8192
[0001.276] I> BCH load address is : 0x807fc000
[0001.281] I> Size of crypto header is 8192
[0001.286] I> BCH of BPMP_FW_DTB read from storage
[0001.291] I> BCH address is : 0x807fc000
[0001.296] I> BPMP_FW_DTB header integrity check is success
[0001.302] I> Binary magic in BCH component 0 is BPMD
[0001.307] I> component binary type is 16
[0001.312] I> Size of crypto header is 8192
[0001.318] I> BPMP_FW_DTB binary is read from storage
[0001.324] I> BPMP_FW_DTB binary integrity check is success
[0001.330] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbff0 (0x1fe80)
[0001.338] I> Task: Load psc-fw (0x50020551)
[0001.344] I> Slot: 0
[0001.346] I> Binary[17] block-0 (partition size: 0xc0000)
[0001.352] I> get_binary_info: Binary name: PSC_FW
[0001.357] I> Size of crypto header is 8192
[0001.362] I> BCH load address is : 0x80ffe000
[0001.367] I> Size of crypto header is 8192
[0001.372] I> BCH of PSC_FW read from storage
[0001.377] I> BCH address is : 0x80ffe000
[0001.382] I> PSC_FW header integrity check is success
[0001.387] I> Binary magic in BCH component 0 is PFWP
[0001.393] I> component binary type is 17
[0001.397] I> Size of crypto header is 8192
[0001.405] I> PSC_FW binary is read from storage
[0001.411] I> PSC_FW binary integrity check is success
[0001.417] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980)
[0001.425] I> Task: Load nvdec-fw (0x500205c5)
[0001.430] I> Slot: 0
[0001.433] I> Binary[7] block-0 (partition size: 0x100000)
[0001.439] I> get_binary_info: Binary name: NVDEC
[0001.444] I> Size of crypto header is 8192
[0001.448] I> BCH load address is : 0x800fe000
[0001.454] I> Size of crypto header is 8192
[0001.458] I> BCH of NVDEC read from storage
[0001.463] I> BCH address is : 0x800fe000
[0001.468] I> NVDEC header integrity check is success
[0001.473] I> Binary magic in BCH component 0 is NDEC
[0001.479] I> component binary type is 7
[0001.483] I> Size of crypto header is 8192
[0001.491] I> NVDEC binary is read from storage
[0001.496] I> NVDEC binary integrity check is success
[0001.501] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000)
[0001.509] I> Size of crypto header is 8192
[0001.527] I> Task: Load tsec-fw (0x5002097d)
[0001.532] I> TSEC-FW load support not enabled
[0001.537] I> Task: GPIO interrupt map (0x500147b5)
[0001.543] I> Task: SC7 context save (0x50020d79)
[0001.549] I> Slot: 0
[0001.551] I> Binary[27] block-0 (partition size: 0x100000)
[0001.557] I> get_binary_info: Binary name: BR_BCT
[0001.562] I> Size of crypto header is 8192
[0001.567] I> Size of crypto header is 8192
[0001.572] I> BR_BCT binary is read from storage
[0001.577] I> BR_BCT binary integrity check is success
[0001.583] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000)
[0001.590] I> Slot: 0
[0001.593] I> Binary[13] block-0 (partition size: 0x30000)
[0001.599] I> get_binary_info: Binary name: SC7-FW
[0001.604] I> Size of crypto header is 8192
[0001.608] I> Size of crypto header is 8192
[0001.613] I> BCH load address is : 0xa0002000
[0001.618] I> Size of crypto header is 8192
[0001.623] I> BCH of SC7-FW read from storage
[0001.627] I> BCH address is : 0xa0002000
[0001.633] I> SC7-FW header integrity check is success
[0001.638] I> Binary magic in BCH component 0 is WB0B
[0001.643] I> component binary type is 13
[0001.648] I> Size of crypto header is 8192
[0001.654] I> SC7-FW binary is read from storage
[0001.660] I> SC7-FW binary integrity check is success
[0001.665] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26db0)
[0001.673] I> Slot: 0
[0001.675] I> Binary[22] block-0 (partition size: 0x30000)
[0001.681] I> get_binary_info: Binary name: PSC_RF
[0001.686] I> Size of crypto header is 8192
[0001.691] I> Size of crypto header is 8192
[0001.695] I> BCH load address is : 0xa002adb0
[0001.701] I> Size of crypto header is 8192
[0001.706] I> BCH of PSC_RF read from storage
[0001.710] I> BCH address is : 0xa002adb0
[0001.715] I> PSC_RF header integrity check is success
[0001.721] I> Binary magic in BCH component 0 is PSCR
[0001.726] I> component binary type is 22
[0001.730] I> Size of crypto header is 8192
[0001.736] I> PSC_RF binary is read from storage
[0001.742] I> PSC_RF binary integrity check is success
[0001.747] I> Binary PSC_RF loaded successfully at 0xa002cdb0 (0x1b140)
[0001.770] I> Task: Save WP0 payload to SC7 ctx (0x50021725)
[0001.777] I> Task: Load MB2rf binary to SC7 ctx (0x500216b9)
[0001.783] I> Slot: 0
[0001.786] I> Binary[14] block-0 (partition size: 0x20000)
[0001.792] I> get_binary_info: Binary name: MB2_RF
[0001.797] I> Size of crypto header is 8192
[0001.801] I> Size of crypto header is 8192
[0001.806] I> BCH load address is : 0xa00d6a48
[0001.811] I> Size of crypto header is 8192
[0001.816] I> BCH of MB2_RF read from storage
[0001.821] I> BCH address is : 0xa00d6a48
[0001.826] I> MB2_RF header integrity check is success
[0001.831] I> Binary magic in BCH component 0 is MB2R
[0001.837] I> component binary type is 14
[0001.841] I> Size of crypto header is 8192
[0001.847] I> MB2_RF binary is read from storage
[0001.852] I> MB2_RF binary integrity check is success
[0001.858] I> Binary MB2_RF loaded successfully at 0xa00d8a48 (0x1bfa0)
[0001.865] I> Task: Save Fuse-Bypass data to SC7 ctx (0x50021621)
[0001.873] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0001.881] I> SC7 context fuse-bypass data is empty
[0001.886] I> Task: Save PMIC data to SC7 ctx (0x5002144d)
[0001.892] I> Task: Save I2C bus freq data to SC7 ctx (0x500213d9)
[0001.899] I> Task: Save SOCTherm data to SC7 ctx (0x50021365)
[0001.906] I> Task: Save FMON data to SC7 ctx (0x500212f1)
[0001.912] I> Task: Save VMON data to SC7 ctx (0x50021279)
[0001.919] I> Task: Save TZDRAM data to SC7 ctx (0x5002178d)
[0001.925] I> Task: Save GPIO int data to SC7 ctx (0x50021561)
[0001.932] I> Task: Save clock data to SC7 ctx (0x50021205)
[0001.939] I> Task: Save debug data to SC7 ctx (0x50021191)
[0001.950] I> SC7 context save done
[0001.954] I> Task: Load MB2/Applet/FSKP (0x5000ca55)
[0001.959] I> Loading MB2
[0001.962] I> Slot: 0
[0001.965] I> Binary[6] block-0 (partition size: 0x80000)
[0001.971] I> get_binary_info: Binary name: MB2
[0001.976] I> Size of crypto header is 8192
[0001.980] I> BCH load address is : 0x8007e000
[0001.986] I> Size of crypto header is 8192
[0001.990] I> BCH of MB2 read from storage
[0001.995] I> BCH address is : 0x8007e000
[0002.000] I> MB2 header integrity check is success
[0002.005] I> Binary magic in BCH component 0 is MB2B
[0002.010] I> component binary type is 6
[0002.014] I> Size of crypto header is 8192
[0002.024] I> MB2 binary is read from storage
[0002.029] I> MB2 binary integrity check is success
[0002.034] I> Binary MB2 loaded successfully at 0x80000000 (0x68ee0)
[0002.042] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9)
[0002.049] I> Task: Prepare MB2 params (0x5000cca9)
[0002.056] I> BR-BCT Boot Chain Fields
[0002.060] I> u32_non_gpio_select_boot_chain : 0
[0002.065] I> u32_num_boot_chains : 2
[0002.070] I> bf_bl_gpio_select_boot_chain_1b : 0
[0002.076] I> Task: Dram ecc test (0x50011791)
[0002.081] I> Task: Misc NV security settings (0x5000c529)
[0002.087] I> NVDEC sticky bits programming done
[0002.092] I> Successfully powergated NVDEC
[0002.097] I> Task: Disable/Reload WDT (0x50021a99)
[0002.103] I> Task: Program misc carveouts (0x50015381)
[0002.109] I> Program IPC carveouts
[0002.116] I> SLCG Global override status := 0x0
[0002.121] I> MB1: MSS reconfig completed
I> MB2 (version: 0.0.0.0-t234-54845784-9c429857)
I> t234-A01-0-Silicon (0x12347)
I> Boot-mode : Coldboot
I> Emulation:
I> Entry timestamp: 0x0020f1c0
I> Regular heap: [base:0x40040000, size:0x10000]
I> DMA heap: [base:0x469800000, size:0x800000]
I> Task: ARI update carveout TZDRAM (0x50001e80)
I> Task: Enable hot-plug capability (0x50026c6c)
I> Task: PSC mailbox init (0x50016a7c)
I> Task: Crypto init (0x500065a8)
I> Task: Enable GP-SE clock (0x50001fe4)
I> Task: DICE Identity init (0x50019e50)
I> DICE is not enabled.
I> Task: OEM SC7 context save init (0x50019550)
I> Task: I2C register (0x50001e44)
I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c)
I> Task: Program CBB PCIE AMAP regions (0x50019b64)
I> Task: Boot device init (0x50001d74)
I> Boot_device: QSPI_FLASH instance: 0
I> Qspi clock source : pllc_out0
I> QSPI-0l initialized successfully
I> Task: Partition Manager Init (0x50001d70)
I> Found 57 partitions in QSPI_FLASH (instance 0)
I> Task: Load and authenticate registered FWs (0x5001ce48)
I> Task: Load AUXP FWs (0x5002680c)
I> Successfully register SPE FW load task with MB2 loader
I> Skipping SCE FW load
I> Successfully register RCE FW load task with MB2 loader
I> Successfully register DCE FW load task with MB2 loader
I> Unpowergating APE
I> Unpowergate done
I> Successfully register APE FW load task with MB2 loader
I> Skipping FSI FW load
I> Successfully register XUSB FW load task with MB2 loader
I> Partition name: A_spe-fw
I> Size of partition: 589824
I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw
I> Partition name: A_rce-fw
I> Size of partition: 1048576
I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw
I> spe: Authentication Finalize Done
I> Binary spe loaded successfully at 0x468c00000
I> Partition name: A_dce-fw
I> Size of partition: 5242880
I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw
I> rce: Authentication Finalize Done
I> Binary rce loaded successfully at 0x468900000
I> dce : oem authentication of header done
I> dce : meta-blob integrity check is success.
I> dce : will be decompressed at 0x472000000
I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0
I> Reserved10 0 BlockMaxSize 5 Reserved11 0
I> dce : decompressed to 9453696 bytes
I> dce: plain binary integrity check is success
I> Partition name: A_adsp-fw
I> Size of partition: 2097152
I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw
I> dce: Authentication Finalize Done
I> Binary dce loaded successfully at 0x472000000
I> Partition name: A_xusb-fw
I> Size of partition: 262144
I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw
I> ape: Authentication Finalize Done
I> Binary ape loaded successfully at 0x469400000
I> xusb: Authentication Finalize Done
I> Binary xusb loaded successfully at 0x468d00000
I> Task: Carveout setup (0x5001f55c)
I> Program remaining OEM carveouts
I> Task: Enable FSITHERM (0x50016950)
I> Task: Enable FSI VMON (0x500164d8)
I> Task: Validate FSI Therm readings (0x50016530)
I> Task: Restore XUSB sec (0x50001d44)
I> Task: Enable FSI SE clock (0x50016ed8)
I> Task: Initialize SBSA UART CAR (0x50001f48)
I> Task: Ratchet update (0x50027d08)
W> OPTIN fuse not set, skip ratchet update
I> Task: Initialize CPUBL Params (0x50017e0c)
I> CPUBL-params @ 0x46e000000
I> Task: Prepare eeprom data (0x50017bd8)
I> Task: FSI padctl context save (0x500196e0)
E> Skipping FSI padctl config save: fsi not enabled
I> Task: Unpowergate APE (0x50017640)
W> mb2_unpowergate_ape: skip! APE is in unpowergated state
I> Task: OEM firewalls (0x5002397c)
I> OEM firewalls configured
I> Task: Powergate APE (0x500177b4)
I> Powergating APE
I> Powergate done
I> Task: OEM firewall restore saved settings (0x50023dd0)
I> Task: Unhalt AUXPs (0x50026a74)
I> Unhalting SPE…
I> Enabling combined UART
����spe: early_init
vic initialized
tsc initialized
aon lic initialized
spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8
spe: SafeRTOS v8.4
spe: init
scheduler initialized
aon hsp initialized
tag initialized
tcu initialized
bpmp ipc initialized
spe: late init
cpu_nic clock initialized
apb clock initialized
pm initialized
bpmp hsp initialized
top1 hsp initialized
ccplex ipc initialized
spe: start scheduler
��
I> Task: Trigger mailbox for PSC-BL1 exit (0x50016afc)
I> Sending opcode 0x4d420802 to psc
��INFO: Entering psc_monitor_init!
INFO: GSC22 BOM:0x46d002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000
INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234
INFO: mstatus:0xa00000808
INFO: Supervisor entry_point:c108c00
��I> Received ACK from psc
I> Tas��INFO: MONITOR: user task addr:��
bpmp: socket 0
bpmp: base binary md5 is 1377b684fe55be78e1d7fc3e0f143b55
bpmp: combined binary md5��0x46d022000, blob offset:0x00020000
INFO: MONITOR: populated user images:13
�� is 463f4d5b75234b74bb7f05b524d2a015
bpmp: firmware tag is 463f4d5b75234b74bb7f-1377b684fe5
initialized vwdt
��INFO: mret to Supervi��initialized mail_early
initialized fuse
initialized vfrel
initialized hwwdt
initialized adc
fmon_populate_monitors: found 199 monitors
initialized fmon
initialized mc
initia��sor!
INFO: psc supervisor init.
INFO: psc_irq_init…
INFO: enter idle task��lized reset
initialized uphy_early
initialized emc_early
471 clocks registered
initialized clk_mach
initialized clk_cal_early
initialized clk_mach_early_config
initialized io_dpd
initialized soctherm
initialized tj_init
initialized regime
initialized i2c
vrmon_dt_init: vrmon node not found
vrmon_chk_boot_state: found 0 rail monitors
initialized vrmon
initialized regulator
initialized avfs_clk_platform
initialized powergate
initialized dvs
initialized clk_��.
��mach_config
initialized pm
initialized suspend
initialized strap
initialized mce_dbell
��k: Start secure NOR provision (0x5001997c)
I> Task: Load FSI keyblob (0x50016f20)
I> Task: Unhalt AUXPs (0x50026a7c)
I> SCE unhalt skipped
I> Unhalting RCE
I> RCE unhalt successful
I> DCE unhalt successful
I> APE unhalt skipped
I> FSI unhalt skipped
I> Task: Load CPUBL (0x50017f04)
I> Task: Load TOS (0x50018608)
I> Task: Load and authenticate registered FWs (0x5001ce48)
I> Partition name: A_��[ 2.538953] Camera-FW on t234-rce-safe started
��cpu��TCU early console enabled.
��initialized emc
initialized emc_mrq
��
��-bootloader��initialized clk_cal
initialized uphy_dt