DSO203 GCC APP - Community Edition (2.51+SmTech1.8+Fixes)

[safar2000]

Wildcat:

@Wildcat

NOTE however, if you have "Cursor select mode" on (mode is on if an "X" shows at top in menu below Ch C)
then ONLY what is between the two T cursors will be counted, so it may appear that more waves need to be included.

Toggle mode by holding button 4 for more than 1 1/2 second, notification will show at bottom and "X" at top will
turn on/off. Please see the user manual for more info on this. Both T and V cursors will affect meter readings in
this mode. Together these cursors can be used to select what part of the waveform meters are reading.

Yes, it was turned on



Thank you!