Wio GPS Tracker has lost the ability to communicate with USB

Moderators: violet, yexiaobo, seth.welday

Post Reply
bjorn.solheim
Pre-kindergarten
Pre-kindergarten
Posts: 2
Joined: Tue Jun 26, 2018 3:23 pm

Wio GPS Tracker has lost the ability to communicate with USB

Post by bjorn.solheim » Tue Jun 26, 2018 4:39 pm

Hi,

My Wio GPS Tracker has lost the ability to communicate with USB.
My guess is that the downloaded sketch writes outside array bounds, and in some way interferes with the communication.
Reset button or removing power do not seem to help. I still cannot se the gadget at the com port.

Is there any easy way to make the Tracker boot without running the sketch, so that I may have the USB connection and download corrections?

Best regards
Bjørn Solheim

hong.jiang
Staff
Staff
Posts: 200
Joined: Tue Apr 17, 2018 11:03 am

Re: Wio GPS Tracker has lost the ability to communicate with USB

Post by hong.jiang » Wed Jun 27, 2018 10:14 am

Hi:
Please double press the RESET key,and Wio GPS Board will be able to communication with USB. If you still cann't solve the problem. Please @ me again, and describe in detail(pictures screenshot).

bjorn.solheim
Pre-kindergarten
Pre-kindergarten
Posts: 2
Joined: Tue Jun 26, 2018 3:23 pm

Re: Wio GPS Tracker has lost the ability to communicate with USB

Post by bjorn.solheim » Mon Jul 09, 2018 3:00 pm

Thank you!

That resolved my problem. :-)

Have a nice day!

Regards
Bjørn

Post Reply