Dielectric height to 4layer pcb

Moderators: violet, carmen.zheng

Locked
lemontzoglou.manolis
Pre-kindergarten
Pre-kindergarten
Posts: 4
Joined: Sun Apr 15, 2018 2:03 am

Dielectric height to 4layer pcb

Post by lemontzoglou.manolis » Sun Apr 15, 2018 2:13 am

Hi,
I am wondering how is the height of the dielectric btw 1st and 2nd or 3rd and 4th layer in a 1.6mm PCB Thickness, in a non impedance control procedure.
Is there a dielectric range of this specification?

lemontzoglou.manolis
Pre-kindergarten
Pre-kindergarten
Posts: 4
Joined: Sun Apr 15, 2018 2:03 am

Re: Dielectric height to 4layer pcb

Post by lemontzoglou.manolis » Sun Apr 15, 2018 2:32 am

Another description for the above is: What is the stack up for your 4 layers pcb with 1.6mm thickness?

At the following picture, the question is focus to the two grey regions (upper & down). Is there a specification of height range about this?

Image

carmen.zheng
Staff
Staff
Posts: 46
Joined: Wed Apr 04, 2018 3:41 pm
Are you a staff member of seeedstudio?: yes
Which products/projects are your favorite?: PCB, PCBA, PCB Layout, 3D Printing, CNC Milling and more!
Location: Shenzhen
Contact:

Re: Dielectric height to 4layer pcb

Post by carmen.zheng » Mon Apr 16, 2018 6:17 pm


lemontzoglou.manolis
Pre-kindergarten
Pre-kindergarten
Posts: 4
Joined: Sun Apr 15, 2018 2:03 am

Re: Dielectric height to 4layer pcb

Post by lemontzoglou.manolis » Wed Apr 18, 2018 1:25 am

Many thanks for the replying.

Yes, these are what I have searched! Thanks again.

But, If this is 0.2mm (Prepreg or FR4 is the term or your links) and not varies, then we can have an impedance control at the Fusion PCB procedure to 4layer pcb!
But, at the Fusion PCB there is a choice for "Impedance Control" with extra payment.
What is more when this enabled?

carmen.zheng
Staff
Staff
Posts: 46
Joined: Wed Apr 04, 2018 3:41 pm
Are you a staff member of seeedstudio?: yes
Which products/projects are your favorite?: PCB, PCBA, PCB Layout, 3D Printing, CNC Milling and more!
Location: Shenzhen
Contact:

Re: Dielectric height to 4layer pcb

Post by carmen.zheng » Wed Apr 18, 2018 1:59 pm

The 4 layer stack-up shown in the links is for our standard non-impedance controlled fabrication process. Of course, if impedance control is selected, the engineers will modify the stack-up and traces accordingly to meet specified requirements.

lemontzoglou.manolis
Pre-kindergarten
Pre-kindergarten
Posts: 4
Joined: Sun Apr 15, 2018 2:03 am

Re: Dielectric height to 4layer pcb

Post by lemontzoglou.manolis » Fri Apr 20, 2018 2:08 am

Many thanks for reply to my answers!

carmen.zheng
Staff
Staff
Posts: 46
Joined: Wed Apr 04, 2018 3:41 pm
Are you a staff member of seeedstudio?: yes
Which products/projects are your favorite?: PCB, PCBA, PCB Layout, 3D Printing, CNC Milling and more!
Location: Shenzhen
Contact:

Re: Dielectric height to 4layer pcb

Post by carmen.zheng » Mon Apr 23, 2018 1:20 pm

No problem!

Locked