Microphone model on ReSpeaker

info about ReSpeaker series products

Moderators: lily.li, salmanfarisvp, violet, seth.welday

Post Reply
Posts: 1
Joined: Mon Nov 18, 2019 9:39 am

Microphone model on ReSpeaker

Post by palette1972 » Mon Nov 18, 2019 9:45 am

We are trying to use "ReSpeaker 6-Mic Circular Array kit for Raspberry Pi" and "ReSpeaker Core v2.0" for an application.

Our application requires each MEMS microphone on board removed and re-connected with shielded cable,
and we would like to know the model of microphones in case they were broken during refactoring process.

Unfortunately, we have not found any information of the model in wiki pages so far.
If it is possible, please let us know that.

User avatar
Posts: 183
Joined: Sun May 20, 2018 2:02 am
Are you a staff member of seeedstudio?: no
Which products/projects are your favorite?: Linklt One , BeagleBone Green , ReSpaker

Re: Microphone model on ReSpeaker

Post by salmanfarisvp » Tue Dec 03, 2019 7:59 pm

Hi palette1972,

ReSpeakers are using Analog MEMS Microphone AOS3729A-T42-NXC and you can find the datasheet here : https://datasheet.lcsc.com/szlcsc/18121 ... 38759.pdf
Start where you are, use what you have, do what you can, Share what you know.

Post Reply