Respeaker 2 mic HAT mic not discovered

I just have installed the driver for Respeaker 2 mic HAT using https://github.com/respeaker/seeed-voicecard.

I can see the aplay device being detected but when I do arecord -l, I get below response:

**** List of CAPTURE Hardware Devices ****

card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []

Subdevices: 0/1

Subdevice #0: subdevice #0



Which, as per my understanding, means the mic is not detected and not ready.



Requesting all gurus to help me out



Thanks,

Ron

Hi there,



Please try the arecord hello.wav and see if you can get the audio file. You also can try the audacity and see if you can record the audio correctly. thanks.

</s>sudo apt install audacity audacity<e>

The wav file data is 0x80.What’s the problem?