[solved]Howto enable own grove driver with iOS-App?

Simplify IoT Development.

Moderators: lily.li, violet, seth.welday

Post Reply
email4kai
Pre-kindergarten
Pre-kindergarten
Posts: 9
Joined: Wed May 04, 2016 3:24 am

[solved]Howto enable own grove driver with iOS-App?

Post by email4kai » Fri May 13, 2016 6:15 am

Hi, I've wrote a simple driver for my own prototype grove. I have successfully compiled the driver & build firmware, as described in 'How-to-write-module-driver-for-Wio-Link'.

But how can I load the firmware with the iOS-App ? I have runnig my own local lean server.
Last edited by email4kai on Sat May 14, 2016 2:53 am, edited 1 time in total.

email4kai
Pre-kindergarten
Pre-kindergarten
Posts: 9
Joined: Wed May 04, 2016 3:24 am

Re: Howto enable own grove driver with iOS-App?

Post by email4kai » Sat May 14, 2016 2:53 am

Made a mistake, i had the app configured with the internet-server. The solution is to configure the app with the custom server and create a new user at the local server.

Post Reply