Grove relay

Simplify IoT Development.

Moderators: lily.li, violet, seth.welday

Post Reply
darryl_peacock
Pre-kindergarten
Pre-kindergarten
Posts: 5
Joined: Fri Jan 22, 2016 12:02 am

Grove relay

Post by darryl_peacock » Wed May 04, 2016 4:03 pm

I am working on software in Node Js for the Wio link and testing the url's in Postman using this url
(the access token is not a valid one)

https://iot.seeed.cc/v1/node/GroveRelay ... 6666666666

This off command works and the response is 200 "result": "ok"

When I use the "on" url

https://iot.seeed.cc/v1/node/GroveRelay ... 6666666666

the response is 200 "result": "ok"

but the relay does NOT operate. If I immediately use post "on" in the Wio android app relay goes on

Any advice would be appreciated

email4kai
Pre-kindergarten
Pre-kindergarten
Posts: 9
Joined: Wed May 04, 2016 3:24 am

Re: Grove relay

Post by email4kai » Wed May 04, 2016 5:17 pm


darryl_peacock
Pre-kindergarten
Pre-kindergarten
Posts: 5
Joined: Fri Jan 22, 2016 12:02 am

Re: Grove relay

Post by darryl_peacock » Wed May 04, 2016 5:53 pm

Thanks for the information, that was the correct solution all working fine

Post Reply