Help with bricked nano ?

Moderators: lily.li, violet, jeremy882, crail.lyu969

Post Reply
irnard
Pre-kindergarten
Pre-kindergarten
Posts: 1
Joined: Wed Dec 19, 2018 2:08 am

Help with bricked nano ?

Post by irnard » Wed Dec 19, 2018 2:16 am

Hi all. I recently tried to change my DSO Nano to BenF but i screwed up something. Now every time i turn it on it goes into firmware upgrade screen without me holding any button. if i hold "M" button it brings info screen. It says its Hardware Version 1.0 . MCU type STM32F103VB. LCM Ctrl ILI_9341 . USB Disk Ext MSD Card. On firmware upgrade screen it states its V3.29D. Now every time i try to put BIN or HEX file on the drive when connected with USB cable it changes into .ERR no matter what version I put on it. Is there any guide how to unbrick or recover it even just to original software ? Any help would be appreciated. Thank you

motopasscode
Kindergarten
Kindergarten
Posts: 85
Joined: Tue Mar 27, 2012 3:44 am

Re: Help with bricked nano ?

Post by motopasscode » Wed Dec 19, 2018 3:50 pm

The files changing to .ERR could be a problem if your computer has Windows 10. Try Windows 7.

Go here viewtopic.php?f=22&t=4823&start=80#p28237 and try to load the LIB code from the zip. See if says .RDY for you. After that it will say No APP Found on the screen. This is step one.

Helpful info http://wiki.seeedstudio.com/DSO_Nano_v3/

Post Reply