Page 1 of 1

Tiny_BLE current consumption

Posted: Thu May 05, 2016 2:18 pm
by tklim
Hi Everebody,

Recently I have received Tiny_BLE board set ( http://www.seeedstudio.com/depot/Seeed- ... -2268.html )
It has current consumption metering circuit at the interface board and PC tool to display/monitor this.
At the product description & wiki there are great pictures with ~0 current consumption.
I have ttired: default firmware, firmware from wiki, firmwares from mbed site - almost all times 8-10mA.
Only with MPU disabled and 5s advertise period - I can see ~1,2mA. I think it's too much.
What I expected: MPU6050 ~5uA at stanby, ~5uA for NRF51822

Did someone experience the same?
Or could someone please share any tested code/fw to check?