u-boot for beagle green

Moderators: lily.li, violet, salmanfarisvp, seth.welday

Post Reply
tuatdc94
Pre-kindergarten
Pre-kindergarten
Posts: 2
Joined: Sat May 19, 2018 5:12 pm

u-boot for beagle green

Post by tuatdc94 » Sat May 19, 2018 5:23 pm

Hi all,

I have a beagle bone green v1 and I want to build u-boot for it by myself. I have refer to many resources but all of these pages don't work for me. I can't go to the u-boot command prompt. I have no ideal why, so can you give me a link or instruction to build u-boot then boot from sd card ?
Thanks for your help.

silver1row
Pre-kindergarten
Pre-kindergarten
Posts: 34
Joined: Mon Apr 25, 2016 7:39 am
Contact:

Re: u-boot for beagle green

Post by silver1row » Sun May 20, 2018 10:42 am

Hello,

I think you may look here: https://forum.digikey.com/t/beaglebone- ... tarted/350.

And another resource: http://processors.wiki.ti.com/index.php ... Everything.

Seth

P.S. If you get stuck, look to the Digi-Key forums or the forums at https://beagleboard.org/discuss. It may have already been answered and posted.

tuatdc94
Pre-kindergarten
Pre-kindergarten
Posts: 2
Joined: Sat May 19, 2018 5:12 pm

Re: u-boot for beagle green

Post by tuatdc94 » Mon May 21, 2018 10:16 pm

Hi Seth,

Thanks for your support. I will check it.

Tuat

silver1row
Pre-kindergarten
Pre-kindergarten
Posts: 34
Joined: Mon Apr 25, 2016 7:39 am
Contact:

Re: u-boot for beagle green

Post by silver1row » Thu May 31, 2018 8:12 am

Hello...did you find any info. worth reading?

Seth

Post Reply