Page 1 of 1

Technical Drawing CAN-BUS V2

Posted: Wed May 01, 2019 10:37 pm
by chad2171
I am looking for a AutoCAD drawing, or 3D model, of the CAN-BUS Shield V2. I want to use it in a wire diagram and a layout for a test box.

Re: Technical Drawing CAN-BUS V2

Posted: Mon May 06, 2019 8:12 pm
by bill.yu
Hi there,

we do not have the autocad/3d drawing this moment, I talked to product manager and she will find resource to generate one.

here is the temporary solution. thanks.

1. the board has the same shape as arduino uno. so you can refer to arduino uno cad file as attached.

http://arduino.cc/documents/ArduinoUno.dxf

2. the difference is the DB9 interface, you can refer to db9 interface dimension from below picture.

Image

Image

Re: Technical Drawing CAN-BUS V2

Posted: Tue May 07, 2019 3:26 pm
by bill.yu