Page 1 of 1

Impossible to upload new firmware to rfbee with the uartsbee

Posted: Sat Apr 11, 2015 9:38 pm
by jithurbide
Hello,

I try to upload the firmware to the rfbee with uartsbee.

I see the serial in the arduino IDE. I configure the IDE with the board :

Arduino Pro or Pro Mini (3.3v, 8MHz) w/ATmega168

During the upload I received this message :


avrdude: Version 5.11, compiled on Sep 2 2011 at 18:52:52
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "xadow.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/XXX/.avrduderc"
User configuration file does not exist or is not a regular file, skipping

Using Port : /dev/tty.usbserial-AJV9OPJ3
Using Programmer : arduino
Overriding Baud Rate : 19200
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding

avrdude done. Thank you.


Can you tell me if it's normal or not ?

Julien

Re: Impossible to upload new firmware to rfbee with the uart

Posted: Mon Apr 13, 2015 9:39 am
by Jacket Chen
Could you please show me two pictures about the front and back of RFBee, i need to confirm that what the version of your module.

Jacket

Re: Impossible to upload new firmware to rfbee with the uart

Posted: Tue Apr 14, 2015 1:19 am
by jithurbide
Please find images of my rfbee and uartsbee.

any news ?

Re: Impossible to upload new firmware to rfbee with the uart

Posted: Fri Apr 17, 2015 9:50 pm
by jithurbide
Can someone help me transferring a new firmware ?

Re: Impossible to upload new firmware to rfbee with the uart

Posted: Sat May 02, 2015 12:09 am
by jithurbide
Hello,

Can someone is using uartsbee to programming a bee module ? If yes, can you help me solve my issue ?