Can i use the grove speech recognizer kit for arduino to make a lamp voice controlled

Grove is a modulated, ready-to-use tool set.
Much like Lego, it takes a building block approach to assembling electronics.

Moderators: lily.li, violet, jeremy882, crail.lyu969

Post Reply
Anonymous
Kindergarten
Kindergarten
Posts: 92
Joined: Mon Jun 03, 2019 10:58 am

Post by Anonymous » Thu Apr 11, 2019 4:33 am

Can i use the grove speech recognizer kit for arduino to make a lamp voice controlled?

Seeed Tech Support
Pre-kindergarten
Pre-kindergarten
Posts: 0
Joined: Mon Jun 03, 2019 10:51 am

Post by Seeed Tech Support » Thu Apr 11, 2019 9:08 am

HI there You have to buy arduino and grove-relay(NOT included) to make the lamp controlled by voice. 
https://www.seeedstudio.com/Seeeduino-L ... -2896.html

http://wiki.seeedstudio.com/Grove-Relay/
You can refer below voice command, for more info, please refer to http://wiki.seeedstudio.com/Grove-Speech_Recognizer/

Command
Value



Turn on the light
1


Turn off the light
2


Play music
3


Pause
4


Next
5


Previous
6


Up
7


Down
8


Turn on the TV
9


Turn off the TV
10


Increase temperature
11


Decrease temperature
12


What’s the time
13


Open the door
14


Close the door
15


Left
16


Right
17


Stop
18


Start
19


Mode 1
20


Mode 2
21


Go
22


thanksbest rgdsBill

Anonymous
Kindergarten
Kindergarten
Posts: 92
Joined: Mon Jun 03, 2019 10:58 am

Post by Anonymous » Thu Apr 11, 2019 10:51 pm

Thank you, also are there any tutorials and codes for the grove relay? I’ve been looking online and can’t find anything
Sent from my iPhone

Seeed Tech Support
Pre-kindergarten
Pre-kindergarten
Posts: 0
Joined: Mon Jun 03, 2019 10:51 am

Post by Seeed Tech Support » Fri Apr 12, 2019 9:53 am

Hi there

You can check http://wiki.seeedstudio.com/Grove-Relay/ , it is digital signal. 

Thanks

best rgds
Bill


Post Reply