Page 1 of 1

mbed drive can not detect.

Posted: Tue Jun 18, 2019 11:48 am
by dan295
I use Arch Pro.
I connect it to Windows PC via Debug USB port with pressing Button, It can detect as "MBED LOADER" Drive.
But I connect it without pressing the button, it can not detect either "MBED LOADER" drive and "MBED" drive.

How to detect it as "MBED" Drive?

Re: mbed drive can not detect.

Posted: Tue Jun 18, 2019 4:04 pm
by bill.yu
Hi there,

Connect the USB interface (next to 'BUTTON') of Arch Pro to your PC using a USB Micro B cable; It automatically appears as a USB device named MBED. thanks.

Re: mbed drive can not detect.

Posted: Wed Jun 19, 2019 2:35 pm
by dan295
Hi bill.yu

I connected the USB interface (next to 'BUTTON') of Arch Pro to your PC using a USB Micro B cable. But, it doesn't appears as a USB device named MBED.

Arch Pro is quiet new board. I bought it yesterday, and I just connect it once.
Only first time, the MBED drive appered.

Thanks.

Re: mbed drive can not detect.

Posted: Thu Jun 20, 2019 7:59 pm
by dan295
I also checked on OSX and it still does not work.
Same behavior.

Re: mbed drive can not detect.

Posted: Fri Jun 21, 2019 3:48 pm
by bill.yu
Hi there~,

Please make sure the usb cable is 4 wires. thanks.