Incorrect Grove Pinouts

Friends,



The grove wiki says the the I2C pinout should be as follows:

http://wiki.seeedstudio.com/Grove_System/#grove-i2c

(Note pin1 is I2C Clock)



The high temp sensor page shows an opposite pinout:

<LINK_TEXT text=“https://www.seeedstudio.com/Grove-I2C-H … -3108.html”>https://www.seeedstudio.com/Grove-I2C-High-Accuracy-Temperature-Sensor-MCP980-p-3108.html</LINK_TEXT>

(Note pin1 is ground)



Which is right?



Thanks, Andy

Hi Andy,



Thanks for pointing the issue, http://wiki.seeedstudio.com/Grove_System/#grove-i2c is right. We will update the high temp sensor’s picture. thanks.



best rgds

Bill