I am new to coding and have recently purchased the Rephone Create Kit and a Xadow Duino to work along side. I am hoping to program via Arduino IDE to generate a PWM signal to control a Dash4 Actuator via a 5V mosfet.
Having scratched around for a helpful tutorial specific to the Xadow Duino module and particularly for Pin selection and definition I have resoundingly failed.
I am powering the actuator externally from the Duino and just want to it to generate a PWM. I hope to get the actuator to actuate, hold in its actuated position for around 5 seconds, then shut again.
Any help for a serious noob would be greatly appreciated, even just a nudge in the right direction!