Search found 12 matches

by rtursen
Fri May 13, 2016 3:21 pm
Forum: BeagleBone
Topic: device tree overlay - gpio
Replies: 2
Views: 4689

Re: device tree overlay - gpio

hello, thanks for the answer. The problem seems to exist. I did one more thing, can you please check it too After I disabled the uart2 cape by commenting it in /boot/uEnv.txt, I was able to load universal cape without problems. echo cape-universaln > /sys/devices/bone_capemgr.9/slot then I wanted to...
by rtursen
Sun May 08, 2016 12:47 am
Forum: BeagleBone
Topic: device tree overlay - gpio
Replies: 2
Views: 4689

device tree overlay - gpio

Hello, Just got my brand new Beaglebone green. I wanted to export one of the GPIOs via the device tree overlays. I have followed the tutorial from http://kilobaser.com/blog/2014-07-28-beaglebone-black-devicetreeoverlay-generator#1gpiodto and got below error root@beaglebone:/lib/firmware# echo bspm_P...
by rtursen
Mon Mar 28, 2016 8:53 pm
Forum: Grove
Topic: grove like cable for 2 pin JST
Replies: 1
Views: 1515

Re: grove like cable for 2 pin JST

Hello friends,

Sorry for double posting but I need your help. Can you please help me find the cable?

I need a cable with both sides as JST 2 pin connector
by rtursen
Thu Mar 24, 2016 7:21 pm
Forum: Grove
Topic: grove like cable for 2 pin JST
Replies: 1
Views: 1515

grove like cable for 2 pin JST

Hello, This post is not directly about grove but I don't know where else to post I am looking for a 2 pin 2mm JST cable with JST connector on both ends . The cables on Seeed's webpage only has the connector at one hand and nothing on the other end. Since I wasn't able to find it on Seeed's webpage, ...
by rtursen
Thu Mar 24, 2016 7:19 pm
Forum: Maker 4 Maker
Topic: JST cable with connector on both ends?
Replies: 1
Views: 8770

Re: JST cable with connector on both ends?

Hello friends,

Sorry for posting again but I am running out of time :/

Do you think that such a cable is not sold? I have been looking for it but can't find it.

If you can point me to a link or a give me the name of the cable then I can do the rest.

thanks a for your help
Rifo
by rtursen
Wed Mar 23, 2016 4:19 am
Forum: Maker 4 Maker
Topic: JST cable with connector on both ends?
Replies: 1
Views: 8770

JST cable with connector on both ends?

Hello, I am looking for a 2 pin 2mm JST cable with JST connector on both ends. The cables on Seeed's webpage only has the connector at one hand and nothing on the other end. Since I wasn't able to find it on Seeed's webpage, I checked other dealers but I wasn't able to find anything. Is there someth...
by rtursen
Mon Feb 29, 2016 5:41 pm
Forum: Grove
Topic: is there a 5 pin grove connector?
Replies: 1
Views: 1368

is there a 5 pin grove connector?

Hello,

Is there a 5 pin version of grove connectors and cables? I would be very happy if you can point me to a link.
I have 5 signals to connect and don't want to use 2 grove connectors for this.

Thanks a lot
Rifo
by rtursen
Mon Feb 29, 2016 5:25 pm
Forum: Grove
Topic: are Grove Connectors suitable for reflowing?
Replies: 0
Views: 1649

are Grove Connectors suitable for reflowing?

Hello,

I want to buy SKU: 320110030, SMD White Male Header VERT;4Pin-2.0
However I couldn't find any info whether this connector is suitable for reflowing?

Can you please help?
Thank you
rifo
by rtursen
Mon Oct 27, 2014 5:45 pm
Forum: Fusion PCB/ PCBA Services
Topic: changing PCB thickness - DRU file modifications
Replies: 1
Views: 1614

changing PCB thickness - DRU file modifications

Hello, Fusion service offers various thickness options. I was wondering if there are seperte DRU files for each thickness. I would like to set my trace impedences, hence it is important for me to know whether the dielectric thickness between the first and second layers change if I opt for a differen...
by rtursen
Mon Oct 27, 2014 5:11 pm
Forum: Fusion PCB/ PCBA Services
Topic: 4 layer DRU rules - min width 8 mil ?
Replies: 2
Views: 2203

4 layer DRU rules - min width 8 mil ?

Hello,

I have checked the DRU file for 4 layer fusion service and the wire clearance values are all set to 8 mil.
On the specs webpage, they are listed as 6 mils

Can you please tell me if I am missing something?

thanks