Search found 14 matches

by jellyfish
Wed Apr 11, 2018 7:06 pm
Forum: Arduino
Topic: Huge Beginners problems with Wifi Shield V 2.0
Replies: 1
Views: 112

Re: Huge Beginners problems with Wifi Shield V 2.0

Hi,

Do you have a USB To UART module? You can use this to judge the problem.
by jellyfish
Mon Apr 09, 2018 9:47 am
Forum: Raspberry Pi
Topic: ReSpeaker 2-Mics PI-HAT
Replies: 2
Views: 265

Re: ReSpeaker 2-Mics PI-HAT

Hi Dear Customer, We see you already got the issue solved through github. We also updated the wiki and we tested it with rpi zero w with kernel 4.14.30 successfully. pi@raspberrypi:~ $ uname -a Linux raspberrypi 4.14.30+ #1102 Mon Mar 26 16:20:05 BST 2018 armv6l GNU/Linux pi@raspberrypi:~ $ Here are...
by jellyfish
Sun Apr 08, 2018 6:38 pm
Forum: Raspberry Pi
Topic: ReSpeaker_2_Mics_Pi_HAT ALSA Configuration..!
Replies: 1
Views: 338

Re: ReSpeaker_2_Mics_Pi_HAT ALSA Configuration..!

Dear Customer, Please download the raspberry latest image and then follow below instructions. We tested it works well. we can hear the voice from the audio port. We already updated wiki to remove 2mics from sudo ./install.sh 2mics. please let us know if any issue. thanks. sudo apt-get update sudo ap...
by jellyfish
Wed Apr 04, 2018 6:24 pm
Forum: BeagleBone
Topic: BBG WIRELESS + GROVE CAPE
Replies: 2
Views: 475

Re: BBG WIRELESS + GROVE CAPE

Hi,

I tested the temperature and humidity sensor with your firmware and it doesn't work. Then I changed to a previous firmware and it worked. This is the download link for the old firmware:
http://debian.beagleboard.org/images/bo ... 4gb.img.xz
I hope this will work.
by jellyfish
Wed Apr 04, 2018 4:56 pm
Forum: Grove
Topic: Serial Bluetooth -can it connect to PC's bluetooth?
Replies: 3
Views: 323

Re: Serial Bluetooth -can it connect to PC's bluetooth?

Hi On my computer,it named BTslave. If your computer can not find the device, you can use your phone Besides please make sure, you have download the proper code into your Arduino. I used this one.(slave code) https://github.com/Seeed-Studio/Bluetooth_Shield_V2_Demo_Code/archive/master.zip For more i...
by jellyfish
Mon Apr 02, 2018 2:21 pm
Forum: BeagleBone
Topic: RE: No Issue But Thank You/Seth
Replies: 4
Views: 309

Re: RE: No Issue But Thank You/Seth

Hi,

We've got your point and updated a new PDF file to fix the problem. Please ckick here to check.


https://github.com/SeeedDocument/Motor_ ... .0_sch.pdf

Thanks for your message.
Have a nice day
by jellyfish
Mon Apr 02, 2018 10:51 am
Forum: Grove
Topic: Grove GSR give 0 output
Replies: 1
Views: 208

Re: Grove GSR give 0 output

Hi there~
Could you please attch the code you use, and a picture to show the hardware connection will be helpful. Thanks


Jelly
by jellyfish
Mon Apr 02, 2018 10:16 am
Forum: Grove
Topic: Grove - Serial Camera Kit
Replies: 1
Views: 209

Re: Grove - Serial Camera Kit

Hi there~
Yes you can, you can use our SD Card shield, it's simple and stable.
Have fun with it

purchase link
https://www.seeedstudio.com/SD-Card-Shi ... -1381.html

More detail
http://wiki.seeedstudio.com/SD_Card_shield_V4.0/
by jellyfish
Fri Mar 30, 2018 7:12 pm
Forum: Arduino
Topic: Seeeduino stalker v3 sleep mode
Replies: 3
Views: 363

Re: Seeeduino stalker v3 sleep mode

Dear Customer, Please try to change the baud rate to Serial.begin(57600).
Here is the output.
--------------------------
Setup
Start
end
Start
end
Start
end
Start
-------------------------
Seeed techsupport team. thanks.
by jellyfish
Fri Mar 30, 2018 6:07 pm
Forum: LinkIt
Topic: LinkIT One Core problem
Replies: 1
Views: 313

Re: LinkIT One Core problem

Dear Customer, please check the switch back to uart and choose the higher com port as the COM during downloading program. By the way, if you face Error code:1011 (5%) during the firmware downloading, please press the reset button. it will work well. for more info, please refer to https://docs.labs.m...